Introduction
Speed (km/h)	60-65 km/h
Hull size (MM)	935*230*120cm
Hull Material	Fiberglass
Hull weight (G)	2200 G
Power	Brushless 3674KV2075 motor， with water cooling，125A ESC with BEC
Prop.	38 Prop. nylon
Drive System	Collect 5*4、Drive shaft φ4、Drive dogφ4、Drive dogφ4
Battery	Recommendation：11.1V LIPO（Additional Choice）
Remote Control	2CH -3CH Radio（Additional Choice）

The first Iridium Spark Plug for RC Model Engine in the world.
Good Quality and Cheap Price!

Air filter for 20-60cc Gas Engine

MLD-70 twin
• Displacement: 4.25ci (70cc)
• Configuration: 2C single cylinder air cooled
• Carburetor: Walbro pump
• Ignition: CDI Electronic ignition w/Auto timing advance / Champion Y82 Spark Plug
( Compatible with CM6)
• Power supply: 4.8V – 8.4V
• Weight 4.73 lbs (75.8oz) including ignition, muffler, Mounting Accessories
• Maximum output: 6.6BHP
• Maximum RPM 8000
• Idle rpm 1200-1500 RPM
• Fuel: Unleaded Gasoline
• OIL: 2-cycle high performance (synthetic is recommended)
• MIX: 1:30 to 1:45
• Prop selection: 22X8-24X8
• product size: (length*wide*high)158mm*250mm*150mm

Scale Prop nut M8*1 for DLE20.Enya 120 all YS 4 stroke

Charger with built-in AC adapter - use at home and at the field 5-1/4" x 5-3/4" x 1-5/8".
Dual Power multi-use charger for 1-6 Li-Ion/LiPo/LiFe cells,1-15 NiCd/NiMH cells,
and Pb 2-20V. Includes adapters for "Deans" style plugs, JST, Rx pack, glow plug
lighter, and alligator clips. Balance plugs on end of unit are JST-XH type and are
compatible with many Asian battery packs.
NOTE: when balance charging Lithiumbatteries, both the balance tap and the main
power wires must be connected to the charger.

B6AC+ Charger Includes:
Internal independent lithium battery balancer: Employs an individual-cell-voltage
balancer to maintain your pack in balance while charging.

Balance individual cells during discharge: During the discharge process, B6-Pro
can monitor and balance each cell of the pack individually. An error messagewill sound
and the process will end automatically if the voltage of any single cell is abnormal.

Fast and Storage mode charging: "Fast" charge will fully charge a lipoly battery in
the shortest time. "Store" setting will charge the battery at approximately a 50% charge
for long term storage. This prolongs the useful life of the battery pack.

Charges various types of LiPoly cells: Includes charging programs for LiFe (A123),
Li-Ion, and LiPo battery types.

Data store/load: Up to 5 batteries' data can be stored for easy programming.

Cyclic charging/discharging: 1-5 cycles of either charge>discharge or dischage>charge
is possible.

B6AC+ Specs:
Operating voltage range: AC 100-240V, DC 11.0~18.0 Volt
Circuit power: Max. charge power 50W
Charge current range: 0.1~5.0A
Discharge current range: 0.1-1.0A
Current drain for balancing Li-po: 300 mAh/cell
NiCd/NiMH battery cell count: 1-15 cells
Li-ion/Polymer cell count: 1-6 series
Pb battery voltage: 2V, 20V

Specs:
2300 mah - RX 2 cell 6.6volt - 2s1p
Max Discharge Continuous - 30c
Weight:150g
With Deans Connector
Battery Size:71*26.5*52.5mm
Length of cables: 62mm/136mm

With 100% carbon fiber,very strong and light
Surface treatment:3K

Size:
A：20cm
B：23cm
C：48.7cm
D：4cm

(The price is for 1 unit only !)

Phoenix 9 in 1 Simulator,Support phoenix 3.0 after updating.
Compatible: Phoenix 1.0 / 2.5/ 3.0, Realflight G2 /G4 / G4.5, Reflex XTR .Aerofly.FMS

Package Include :
JR Audio cable 1PCS
Futaba convert cables 2pcs
Esky convert cable 1pcs
DVD 2pcs
USB dog 1pcs

FEATURES
1. Battery Checker
2. Battery Internal Resistance
3. Watt Meter
4. Servo Tester
5. Optical Tachometer
6. Temperature Gauge
7. Thrust Calculator

Specification:

Wingspan: 65inch/1659mm

Length: 59.1inch/1502mm

Flying weight: 3100g

Wing Area: 50.5sq.dm

Engine Size: 60-90, 90-110 / DLE 20CC

With carbon fiber wing tube.

Features:
1. Light weight construction
2. Latest structure
3. High structural strength
4. Two pieces of removable wings
5. Super quality
6. Excellent aerobatics and 3D performance
7. Easy installation
8.Complete accessories
9. High performance hardware including: Ball linkage control system; PU wheels;C.F.Tube;,

Professional designed for 3D and precision aerobatics Cowl with cowl ring,
No exterior screws exposed ;Removable wings; Pre mounted and painted Canopy;

Requirements for Ready to fly complete set (need buy separately)

Engine: 60-90, 90-110 Nitro Engine or DLE 20CC

Radio: 4-6 Channels, at least 6 servos,

Propeller: 11x6, 12x6,13x4,13x8,15x6,16x5,16x8,16x10,17x6,depends on engine

Spinner: 2.255-3.25inch spinner

Receiver battery：（suggest item No.：A123-2SFJ，A123-2ST, NH1200-4，NH1500-4，NH1500-5B，NH1500-5A， NH2000-4, NH2000-5）

Power Switch : twin power switch( one for the receiver, one for the ignition CDI),

Fuel line

Specification:
Wing span: 1850mm/73in
Length: 1765mm/69in
Wing area: 54sq.dm
Engine: 30CC
Fly weight: around 4500g
Radio: 4-6Channels

Features:

1. Light weight construction
2. Latest structure
3. High structural strength
4. Two pieces of removable wings
5. Super quality
6. Excellent aerobatics and 3D performance
7. Easy installation
8. Fully symmetrical aerofoil tail wing
9.Complete accessories
10. High performance hardware including: Ball linkage control system; PU wheels; C.F.Tube; Carbon Landing gear;

Professional designed for 3D and precision aerobatics Cowl with cowl ring,
No exterior screws exposed ;
Removable wings; Pre mounted and painted Canopy;

Carbon Fiber accessories:
Carbon Fiber wing tube include
Carbon Fiber tail wing tube include
Carbon Fiber landing gear include
Carbon Fiber tail wheel include

Requirements for Ready to fly complete set (need buy separately)

Engine:30-40cc Gas Engine

Radio: 4-6 Channels, at least 6 servos,

Propeller: 18x6,18x8.18x10,19x6,19x8,19x10

Spinner: 3.5inch

Receiver battery：（suggest item No.：A123-2SFJ，A123-2ST, NH1200-4，NH1500-4，NH1500-5B，NH1500-5A，NH2000-4, NH2000-5）

Power Switch : twin power switch( one for the receiver, one for the ignition CDI),

Fuel line

Specification:

Wing span: 1850mm/73in
Length: 1765mm/69in
Wing area: 54sq.dm
Engine: 30CC
Fly weight: around 4500g
Radio: 4-6Channels

Features:

1. Light weight construction
2. Latest structure
3. High structural strength
4. Two pieces of removable wings
5. Super quality
6. Excellent aerobatics and 3D performance
7. Easy installation
8. Fully symmetrical aerofoil tail wing
9.Complete accessories
10. High performance hardware including: Ball linkage control system; PU wheels; C.F.Tube; Carbon Landing gear;

Professional designed for 3D and precision aerobatics Cowl with cowl ring,
No exterior screws exposed ;
Removable wings; Pre mounted and painted Canopy;

Carbon Fiber accessories:
Carbon Fiber wing tube include
Carbon Fiber tail wing tube include
Carbon Fiber landing gear include
Carbon Fiber tail wheel include

Requirements for Ready to fly complete set (need buy separately)

Engine:30-40cc Gas Engine

Radio: 4-6 Channels, at least 6 servos,

Propeller: 18x6,18x8.18x10,19x6,19x8,19x10

Spinner: 3.5inch

Receiver battery：（suggest item No.：A123-2SFJ，A123-2ST, NH1200-4，NH1500-4，NH1500-5B，NH1500-5A，NH2000-4, NH2000-5）

Power Switch : twin power switch( one for the receiver, one for the ignition CDI),

Fuel line

Specification:

Wing span: 1850mm/73in
Length: 1765mm/69in
Wing area: 54sq.dm
Engine: 30CC
Fly weight: around 4500g
Radio: 4-6Channels

Features:

1. Light weight construction
2. Latest structure
3. High structural strength
4. Two pieces of removable wings
5. Super quality
6. Excellent aerobatics and 3D performance
7. Easy installation
8. Fully symmetrical aerofoil tail wing
9.Complete accessories
10. High performance hardware including: Ball linkage control system; PU wheels; C.F.Tube; Carbon Landing gear;

Professional designed for 3D and precision aerobatics Cowl with cowl ring,
No exterior screws exposed ;
Removable wings; Pre mounted and painted Canopy;

Carbon Fiber accessories:
Carbon Fiber wing tube include
Carbon Fiber tail wing tube include
Carbon Fiber landing gear include
Carbon Fiber tail wheel include

Requirements for Ready to fly complete set (need buy separately)

Engine:30-40cc Gas Engine

Radio: 4-6 Channels, at least 6 servos,

Propeller: 18x6,18x8.18x10,19x6,19x8,19x10

Spinner: 3.5inch

Receiver battery：（suggest item No.：A123-2SFJ，A123-2ST, NH1200-4，NH1500-4，NH1500-5B，NH1500-5A，NH2000-4, NH2000-5）

Power Switch : twin power switch( one for the receiver, one for the ignition CDI),

Fuel line